DEMO|

THE CUSTOMS TARIFF ACT, 1975 (SCHEDULE)
SECTION VII. PLASTICS AND ARTICLES THEREOF, RUBBER AND ARTICLES THEREOF

THE FIRST SCHEDULE TO THE CUSTOMS TARIFF ACT, 1975

SECTION-VII

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF

Notes :

1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this Section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are :-

    (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked;

    (b) presented together; and

    (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another.

2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.

Chapter 39

Plastics and articles thereof

Notes :

1. Throughout this Schedule, the expression "plastics" means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence.

Throughout this Schedule any reference to "plastics" also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI.

2. This Chapter does not cover:-

    (a) lubricating preparations of heading 2710 or 3403;

    (b) waxes of heading 2712 or 3404;

    (c) separate chemically defined organic compounds (Chapter 29);

    (d) heparin or its salts (heading 3001);

    (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50% of the weight of the solution (heading 3208); stamping foils of heading 3212;

    (f) organic surface-active agents or preparation of heading 3402;

    (g) run gums or ester gums (heading 3806);

    (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811);

    (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819);

    (k) diagnostic or laboratory reagents on a backing of plastics (heading 3822);

    (l) synthetic rubber, as defined for the purpose of Chapter 40, or articles thereof;

    (m) saddlery or harness (heading 4201) or trunks, suit-cases, hand-bags or other containers of heading 4202;

    (n) plaits, wickerwork or other articles of Chapter 46;

    (o) wall coverings of heading 4814;

    (p) goods of Section XI (textiles and textile articles);

    (q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking-sticks, whips, riding-crops or parts thereof);

    (r) imitation jewellery of heading 7117;

    (s) articles of Section XVI (machines and mechanical or electrical appliances);

    (t) parts of aircraft or vehicles of Section XVII;

    (u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments);

    (v) articles of Chapter 91 (for example, clock or watch cases);

    (w) articles of Chapter 92 (for example, musical instruments or parts thereof);

    (x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings);

    (y) articles of Chapter 95 (for example, toys, games, sports requisites); or

    (z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouth-pieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils and monopods, bipods, tripods and similar articles).

3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories:-

    (a) liquid synthetic polyolefins of which less than 60% by volume distils at 3 000C, after conversion to 1,013 millibars when a reduced pressure distillation method is used (headings 3901 and 3902);

    (b) resins, not highly polymerised, of the coumarone-indene type (heading 3911);

    (c) other synthetic polymers with an average of at least 5 monomer units;

    (d) silicones (heading 3910);

    (e) resols (heading 3909) and other prepolymers.

4. The expressions "copolymers" covers all polymers in which no single monomer unit contributes 95% or more by weight to the total polymer content.

For the purposes of this Chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer bends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this Note, constituent comonomer units of polymers falling in the same heading shall be taken together.

If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration.

5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers.

6. In headings 3901 to 3914, the expression "primary forms" applies only to the following forms:-

    (a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions;

    (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms.

7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914).

8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes.

9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated.

10. In headings 3920 and 3921, the expression "plates, sheets, film foil and strip" applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use).

11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-Chapter II:-

    (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 3001;

    (b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs;

    (c) gutters and fittings thereof;

    (d) doors, windows and their frames and thresholds for doors;

    (e) balconies, balustrades, fencing, gates and similar barriers ;

    (f) shutters, blinds (including Venetian blinds) and similar articles and parts and fittings thereof;

    (g) large scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses;

    (h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and

    (ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates.

Sub-heading Notes :

1. Within any one heading of this Chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions:-

    (a) where there is a sub-heading named "Other" in the same series:-

      (1) the designation in a sub-heading of a polymer by the prefix "poly" (for exemple polyethylene and polyamide -6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95% or more by weight of the total polymer content;

      (2) the copolymers named in sub-headings 3901 30, 3901 40, 3903 20, 3903 30, and 3904 30 are to be classified in those sub-headings, provided that the comonomer units of the named copolymers contribute 95% or more by weight of the total polymer content;

      (3) chemically modified polymer are to be classified in the sub-heading named "Other", provided that the chemically modified polymers are not more specifically covered by an other subheading;

      (4) polymers not meeting (1), (2) or (3) above, are to be classified in the sub-heading, among the remaining sub-headings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same sub-heading shall be taken together. Only the constituent comonomer units of the polymers in the series of sub-headings under consideration are to be compared;

    (b) where there is no sub-heading named "Other" in the same series:-

      (1) polymers are to be classified in the sub-heading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same sub-heading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared;

      (2) chemically modified polymers are to be classified in the sub-heading appropriate to the unmodified polymer.

Polymer blends are to be classified in the same sub-heading as polymers of the same monomer units in the same proportions.

2. For the purposes of sub-heading 3920 43, the term "plasticisers" includes secondary plasticisers.

Supplementary Note:

1. In this Chapter, reference to any standard of the Bureau of Indian Standards refers to the last published version of that standard.

Tariff Item Description of goods Unit Rate of duty

Standard Preferential Areas
(1) (2) (3) (4) (5)
3901 I. PRIMARY FORMS POLYMERS OF ETHYLENE, IN PRIMARY FORMS      
3901 10 - Polyethylene having a specific gravity of less than 0.94 :      
3901 10 10 - - - Linear low density polyethylene (LLDPE), in which ethylene monomer unit contributes 95 % or more by weight of the total polymer content kg. 7.5% -
3901 10 20 - - - Low density polyethylene (LDPE) kg. 7.5% -".
3901 10 90 --- Other kg. 7.5% -
3901 20 00 - Polyethylene having a specific gravity of 0.94 or more kg. 7.5% -
3901 30 00 - Ethylene-vinyl acetate copolymers kg. 7.5% -
3901 40 - Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0.94:      
3901 40 10 - - - Linear low density polyethylene (LLDPE), in which ethylene monomer unit contributes less than 95 % by weight of the total polymer content kg. 7.5% -
3901 40 90 - - - Other kg. 7.5% -
3901 90 00 - Other kg. 7.5% -
3902 POLYMERS OF PROPYLENE OR OF OTHER OLEFINS, IN PRIMARY FORMS      
3902 10 00 - Polypropylene kg. 7.5% -
3902 20 00 - Poly iso butylene kg. 7.5% -
3902 30 00 - Propylene copolymers kg. 7.5% -
3902 90 00 - Other kg. 7.5% -
3903 POLYMERS OF STYRENE, IN PRIMARY FORMS      
  - Polystyrene:      
3903 11 00 -- Expansible kg. 7.5% -
3903 19 -- Other :      
3903 19 10 --- Moulding Powder kg. 7.5% -
3903 19 90 --- Other kg. 7.5% -
3903 20 00 - Styrene-acrylonitrile (SAN) copolymers kg. 7.5% -
3903 30 00 - Acrylonitrile-butadine-styrene (ABS) copolymers kg. 7.5% -
  - Other :      
3903 90 10 --- Copolymers, solely of styrene with allyl alcohol, of any acetyl value of 175 or more kg. 7.5% -
3903 90 20 --- Brominated polystyrene, containing by weight 58% or more but not more than 71% of bromine, in one of the forms mentioned in Note 6(b) to this Chapter kg. 7.5% -
3903 90 90 --- Other kg. 7.5% -
3904 POLYMERS OF VINYL CHLORIDE OR OF OTHER HALOGENATED OLEFINS, IN PRIMARY FORMS      
3904 10 - Poly (vinyl chloride), not mixed with other any substances:      
3904 10 10 --- Emulsion grade PVC resin / PVC Paste resin/ PVC dispersion resin kg. 10% -
3904 10 20 --- Suspension grade PVC resin kg. 10% -
3904 10 90 --- Other kg. 10% -
  - Other poly (vinyl chloride), mixed with other substances:      
3904 21 00 -- Non-plasticised kg. 10% -
3904 22 00 -- Plasticised kg. 10% -
  - Other poly (vinyl chloride)      
3904 21 -- Non-plasticised:      
3904 21 10 --- Poly (vinyl chloride) resins kg. 10% -
3904 21 90 --- Other kg. 10% -
3904 22 -- Plasticised:      
3904 22 10 --- Poly (vinyl chloride) (PVC) Resins (emulsion grade) kg. 10% -
3904 22 90 --- Other kg. 10%  
3904 30 - Vinyl chloride-vinyl acetate copolymers      
3904 30 10 --- Poly (vinyl derivatives) kg. 10% -
3904 30 90 --- Other kg. 10% -
3904 40 00 - Other vinyl chloride copolymers kg. 10% -
3904 50 - Vinylidene chloride polymers :      
3904 50 10 - - - Copolymer of vinylidene chloride with acrylonitrite, in the form of expansible beads of a diameter of 4 micrometers or more but not more than 20 micrometers kg. 10% -
3904 50 90 --- Other kg. 10%  
- Fluro-polymers :      
3904 61 00 -- Polytetrafluroethylene kg. 10% -
-- Other :      
3904 69 10 --- Poly (vinyl fluoride), in one of the forms mentioned in Note 6(b) to this Chapter kg. 10% -
3904 69 90 --- Other kg. 10% -
3904 90 - Other:      
3904 90 10 - - - Chlorinated poly vinyl chloride (CPVC) resin kg. 10% -
3904 90 90 - - - Other kg. 10% -
3905 POLYMERS OF VINYL ACETATE OR OF OTHER VINYL ESTERS, IN PRIMARY FORMS; OTHER VINYL POLYMERS IN PRIMARY FORMS      
- Poly (vinyl acetate) :      
3905 12 -- In aqueous dispersion:      
3905 12 10 --- Poly (vinyl acetate) (PVA), moulding material kg. 7.5% -
3905 12 20 --- Poly (vinyl acetate) resins kg. 7.5% -
3905 12 90 --- Other kg. 7.5% -
3905 19 -- Other :      
3905 19 10 --- Poly (vinyl acetate) (PVA) moulding material kg. 7.5%  
3905 19 20 --- Poly (vinyl acetate) and resins kg. 7.5% -
3905 19 90 --- Other kg. 7.5% -
  - Vinyl acetate copolymers :      
3905 21 00 -- In aqueous dispersion kg. 7.5% -
3905 29 00 -- Other kg. 7.5% -
3905 30 00 -- Poly (vinyl alcohol), whether or not containing unhydrolysed acetate groups kg. 7.5% -
- Other :      
3905 91 00 -- Copolymers kg. 7.5% -
3905 99 -- Other :      
3905 99 10 --- Poly (vinyl pirolidone) (p alcohol) kg. 7.5% -
3905 99 90 --- Other kg. 7.5% -
3906 ACRYLIC POLYMERS IN PRIMARY FORMS Poly (methyl methacrylate):      
3906 10 10 --- Binders for pigments or inks kg. 7.5% -
3906 10 90 --- Other kg. 7.5% -
3906 90 - Other :      
3906 90 40 - - - Poly (acrylic acid) kg. 7.5% -
3906 90 50 - - - Polyacrylonitrile (PAN) kg. 7.5% -
3906 90 60 - - - Copolymers of acrylonitrile kg. 7.5% -
3906 90 70 - - - Sodium polyacrylate kg. 5% -
3906 90 90 --- Other kg. 7.5% -
3907 POLYACETALS, OTHER POLYETHERS AND EPOXIDE RESINS, IN PRIMARY FORMS; POLYCARBONATES, ALKYD RESINS, POLYALLYLESTERS AND OTHER POLYESTERS, IN PRIMARY FORMS      
3907 10 00 - Polyacetals kg. 7.5% -
  - Other polyethers:      
3907 21 00 -- Bis (polyoxyethylene) methylphosphonate kg. 7.5%  
3907 29 -- Other:      
3907 29 10 --- Poly (ether alcohols) kg. 7.5%  
3907 29 90 --- Other kg. 7.5%  
3907 30 - Epoxide resins :      
3907 30 10 --- Epoxy resins kg. 7.5% -
3907 30 90 --- Other kg. 7.5% -
3907 40 00 - Polycarbonates kg. 7.5% -
3907 50 00 - Alkyd resins kg. 7.5% -
  - Poly (ethylene terephthalate) :      
3907 61 - - Having a viscosity number of 78 ml/g or higher:      
3907 61 10 - - - PET flake (chip) kg. 7.5% -
3907 61 90 - - - Other primary form kg. 7.5% -
3907 69 -- Other:      
3907 69 30 - - - PET flake (chip) kg. 7.5% -
3907 69 90 - - - Other primary form kg. 7.5% -
3907 70 00 - Poly (Lactic Acid) kg. 7.5% -
  - Other polyesters :      
3907 91 -- Unsaturated :      
3907 91 10 --- Maleic resins kg. 7.5% -
3907 91 20 --- Polyester or contract resins kg. 7.5% -
3907 91 30 --- Fumeric resins kg. 7.5% -
3907 91 40 --- Diallylphthalate resins kg. 7.5% -
3907 91 50 --- Poly (butylene terepthalate) kg. 7.5% -
3907 91 90 --- Other kg. 7.5% -
3907 99 Omitted      
3907 99 10 Omitted      
3907 99 20 Omitted      
3907 99 00 - - Other kg. 7.5% -
3908 POLYAMIDES IN PRIMARY FORMS      
3908 10 - Polyamide -6, -11,-12, -6, 6,-6, 9, -6, 10 or -6,12:      
  - - - Polyamide -6 (Nylon-6):      
3908 10 11 - - - - Flake (chip) kg. 10% -
3908 10 19 - - - - Other primary form kg. 10% -
  - - - Polyamide -11 (Nylon-11):      
3908 10 21 - - - - Flake (chip) kg. 10% -
3908 10 29 - - - - Other primary form kg. 10% -
  - - - Polyamide -12 (Nylon-12):      
3908 10 31 - - - - Flake (chip) kg. 10% -
3908 10 39 - - - - Other primary form kg. 10% -
  - - - Polyamide -6,6 (Nylon-6,6):      
3908 10 41 - - - - Flake(chip) kg. 10% -
3908 10 49 - - - - Other primary form kg. 10% -
  - - - Polyamide -6,9 (Nylon-6,9):      
3908 10 51 - - - - Flake (chip) kg. 10% -
3908 10 59 - - - - Other primary form kg. 10% -
  - - - Polyamide -6,10 (Nylon-6,10):      
3908 10 61 - - - - Flake (chip) kg. 10% -
3908 10 69 - - - - Other primary form kg. 10% -

  - - - Polyamide -6,12 (Nylon-6,12):      
3908 10 71 - - - - Flake (chip) kg. 10% -
3908 10 79 - - - - Other primary form kg. 10% -
3908 90 00 - Other kg. 10% -
3909 AMINO-RESINS, PHENOLIC RESINS AND POLYURETHANES, IN PRIMARY FORMS      
3909 10 - Urea resins; thiourea resins :      
3909 10 10 --- Urea formaldehyde resins kg. 7.5% -
3909 10 90 --- Other kg. 7.5% -
3902 20 - Melamine resins :      
3909 20 10 --- Melamine formaldehyde resins kg. 7.5% -
3909 20 90 --- Other kg. 7.5% -
  - Other amino-resins:      
3909 31 00 -- Poly(methylene phenyl isocyanate) (crude MDI, polymeric MDI) kg. 7.5% -
3909 39 -- Other:      
3909 39 10 --- Poly(phenylene oxide) kg. 7.5% -
3909 39 90 --- Other kg. 7.5% -
3909 40 - Phenolic resins :      
3909 40 10 --- Cresol formaldehyde oxide kg. 7.5% -
3909 40 20 --- Phenol formaldehyde resins kg. 7.5% -
3909 40 30 --- Alkyl phenol-formaldehyde resins kg. 7.5% -
3909 40 40 --- Ketonic resins kg. 7.5% -
3909 40 50 --- Phenoxi resins kg. 7.5% -
3909 40 60 --- Terpene phenolic resins kg. 7.5% -
3909 40 90 --- Other kg. 7.5% -
3909 50 00 - Polyurethanes kg. 7.5% -
3910 - SILICONES IN PRIMARY FORMS      
3910 00 - Silicones in primary forms      
3910 00 10 --- Silicone resins kg. 7.5% -
3910 00 20 --- Silicone oil kg. 7.5% -
3910 00 90 --- Other kg. 7.5% -
3911 PETROLEUM RESINS, COUMARONE-INDENE RESINS, POLYTERPENES, POLYSULPHIDES, POLYSULPHONES AND OTHER PRODUCTS SPECIFIED IN NOTE 3 TO THIS CHAPTER, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS      
3911 10 - Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes:      
3911 10 10 --- Coumarone-indene resins kg. 7.5% -
3911 10 90 --- Other kg. 7.5% -
3911 20 00 - Poly (1,3-phenylene methylphosphonate) kg. 7.5% -
3911 90 - Other :      
3911 90 10 --- Polysulphones kg. 7.5% -
3911 90 90 --- Other kg. 7.5% -
3912 - CELLULOSE AND ITS CHEMICAL DERIVATIVES, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS      
  - Cellulose acetates :      
3912 11 -- Non-plasticised:      
3912 11 10 --- Cellulose acetate flakes kg. 7.5% -
3912 11 20 --- Cellulose acetate moulding powder kg. 7.5% -
3912 11 30 --- Cellulose acetobutyrate moulding powder kg. 7.5% -
3912 11 40 --- Cellulose nitrate, dynamic grade kg. 7.5% -
3912 11 90 --- Other kg. 7.5% -
3912 12 -- Plasticised :      
3912 12 10 --- Cellulose acetate flakes kg. 7.5% -
3912 12 20 --- Cellulose acetate moulding powder kg. 7.5% -
3912 12 30 --- Cellulose acetobutyrate moulding powder kg. 7.5% -
3912 12 90 --- Other kg. 7.5% -
3912 20 - Cellulose nitrates (including collodions):      
-- Non-plasticised:      
3912 20 11 ---- Moulding powders kg. 7.5% -
3912 20 19 ---- Other kg. 7.5% -
--- Plasticised :      
3912 20 21 ---- Moulding powders kg. 7.5% -
3912 20 29 ---- Other kg. 7.5% -
- Cellulose ethers:      
3912 31 00 -- Carboxymethyl cellulose and its salts kg. 7.5%  
3912 39 -- Other :      
--- Non-plascised:      
3912 39 11 ---- Ethylcellulose kg. 7.5% -
3912 39 12 ---- Methylcellulose kg. 7.5% -
3912 39 19 ---- Other cellulose ethers kg. 7.5% -
--- Plasticised:      
3912 39 21 ---- Ethyl cellulose kg. 7.5%  
3912 39 22 ---- Methyl cellulose kg. 7.5% -
3912 39 29 ---- Other cellulose ether kg. 7.5% -
3912 90 - Other:      
3912 90 10 --- Cellulose propionate and aceto propionate, non-plasticised kg. 7.5% -
3912 90 20 --- Viscose sponge kg. 7.5% -
3912 90 90 --- Other kg. 7.5% -
3913 NATURAL POLYMERS (FOR EXAMPLE, ALGINIC ACID) AND MODIFIED NATURAL POLYMERS (FOR EXAMPLE, HARDENED PROTEINS, CHEMICAL DERIVATIVES OF NATURAL RUBBER), NOT ELSEWHERE SPECIFIED OR included, IN PRIMARY FORMS      
3913 10 - Alginic acid, its salts and esters :      
3913 10 10 --- Sodium alginate kg. 7.5% -
3913 10 90 --- Other kg. 7.5% -
3913 90 - Other :      
--- Chemical derivatives of natural rubber:      
3913 90 11 ---- Chlorinated rubber kg. 7.5% -
3913 90 19 ---- Other kg. 7.5% -
3913 90 20 --- Hardened proteins (such as hardened casein,gelatin) kg. 7.5% -
3913 90 30 --- Dextran kg. 7.5%  
3913 90 90 --- Other kg. 7.5% -
3914 IONEXCHANGERS BASED ON POLYMERS OF HEADINGS 3901 TO 3913, IN PRIMARY FORMS      
3914 00 - Ion-exchangers based on polymers of headings 3901 to 3913, in primary forms:      
3914 00 10 --- Ion-exchangers of the condensation, polycondensation or polyaddition type kg. 7.5% -
3914 00 20 --- Ion-exchangers of polymerisation or co-polymerisation type kg. 7.5% -
3914 00 90 --- Other kg. 7.5% -
3915 II. -WASTE, PARINGS AND SCRAP; SEMI-MANUFACTURES; ARTICLES Waste, parings and scrap, of plastics      
3915 10 00 - Of polymers of ethylene kg. 7.5% -
3915 20 00 - Of polymers of styrene kg. 7.5% -
3915 30 - Of polymers of vinyl chloride:      
3915 30 10 --- Of copolymers of vinyl chloride kg. 7.5% -
3915 30 90 --- Other kg. 7.5% -
3915 90 - Of other plastics :      
3915 90 10 --- Of polypropylene kg. 7.5% -
--- Of polymers of vinyl acetate :      
3915 90 21 ---- Of copolymers of vinyl acetate kg. 7.5% -
3915 90 29 ---- Other kg. 7.5% -
3915 90 30 --- Of acrylic polymers and methlyacrylic copolymers kg. 7.5% -
--- Of alkyds, polyesters and epoxide resins :      
3915 90 41 ---- Of alkyds and polyesters kg. 7.5%  
3915 90 42 ---- Of pet bottles kg. 7.5% -
3915 90 49 ---- Of epoxide resins kg. 7.5% -
3915 90 50 --- Of polyamides kg. 7.5% -
--- Of amino resins; phenolic resins and polyurethanes :      
3915 90 61 ---- Of phenoplast kg. 7.5%  
3915 90 62 ---- Of aminoplast kg. 7.5% -
3915 90 63 ---- Of polyurethanes kg. 7.5% -
--- Of cellulose and its chemical derivatives:      
3915 90 71 ---- Of regenerated cellulose kg. 7.5% -
3915 90 72 ---- Cellulose plastic waste such as cellulose nitrate film scrap non-plasticised kg. 7.5% -
3915 90 73 ---- Cellulose plastic waste such as cellulose nitrate film scrap plasticised kg. 7.5% -
3915 90 74 ---- Cellulose plastic waste such as cellulose acetatc film scrap non-plasticised kg. 7.5% -
3915 90 75 ---- Cellulose plastic waste such as cellulose acetatc film scrap plasticised kg. 7.5% -
3915 90 79 ---- Others kg. 7.5% -
3915 90 90 --- Other kg. 7.5% -
3916 MONOFILAMENT OF WHICH ANY CROSS SECTIONAL DIMENSION EXCEEDS 1MM, RODS, STICKS AND PROFILE SHAPES, WHETHER OR NOT SURFACE-WORKED BUT NOT OTHERWISE WORKED, OF PLASTICS      
3916 10 - Of polymers of ethylene:      
3916 10 10 --- Rods of polyethylene kg. 10% -
3916 10 20 --- Canes kg. 10% -
3916 10 90 --- Other kg. 10% -
3916 20 - Of polymers of vinyl chloride:      
--- Of poly (vinyl chloride) copolymers :      
3916 20 11 ---- Canes kg. 10% -
3916 20 19 ---- Other kg. 10% -
--- Other:      
3916 20 91 ---- Canes kg. 10% -
3916 20 99 ---- Other kg. 10% -
3916 90 - Of other plastics :      
3916 90 10 --- Canes kg. 10% -
--- Of phenoplast, aminoplast, alkyds and Polyesters, polyamides, polyurethanes, epoxide-resins (including waste and scrap), polypropylene and acrylic, methacrylic and acrylomethacrylic polymers :      
3916 90 21 ---- Of phenoplast kg. 10% -
3916 90 22 ---- Of aminoplast kg. 10% -
3916 90 23 ---- Of alkyds and polysters kg. 10% -
3916 90 24 ---- Of polyamides kg. 10% -
3916 90 25 ---- Of polyurethanes kg. 10% -
3916 90 26 ---- Of epoxide-resins (including waste and scrap) kg. 10% -
3916 90 27 ---- Of polypropylene kg. 10% -
3916 90 28 ---- Of acrylicmethacrylic and acrylomethacrylic polymers kg. 10% -
--- Of polymerisation and copolymerisation products of polystyrene and polymethyl methacrylate :      
3916 90 31 ---- Of polymerisation and copolymerisation products of polystyrene kg. 10% -
3916 90 32 ---- Of polymethyl methacrylate kg. 10% -
3916 90 40 --- Of regenerated cellulose kg. 10% -
3916 90 50 --- Of cellulose nitrate and celluloid, whether or not plasticized kg. 10% -
3916 90 60 --- Of vulcanized fibre kg. 10% -
3916 90 70 --- Of cellulose acetate and acetate butyrate, whether or not plasticized kg. 10% -
3916 90 80 --- Of vinyl plastic kg. 10% -
3916 90 90 --- Of other polymerisation and copolymerisation products kg. 10%  
3917 TUBES, PIPES AND HOSES, AND FITTINGS THEREFOR (FOR EXAMPLE, JOINTS, ELBOWS, FLANGES), OF PLASTICS      
- Artificial guts (sausage casings) of hardened protein or of cellulosic materials:      
3917 10 10 --- Of hardened protein kg. 10% -
3917 10 20 --- Of cellulosic materials kg. 10% -
  - Tubes, pipes and hoses, rigid :      
3917 21 -- Of polymers of ethylene:      
391721 10 --- Tubes of polyethylene kg. 10% -
3917 21 90 --- Other kg. 10% -
3917 22 00 -- Of polymers of propylene kg. 10% -
3917 23 -- Of polymers of vinyl chloride :      
391723 10 --- Seamless tubes kg. 10% -
3917 23 90 --- Other kg. 10% -
3917 29 -- Of other plastics :      
3917 29 10 --- Seamless tubes of copolymers of vinyl acetate and vinyl chloride kg. 10% -
3917 29 20 --- Seamless tubes of polymers and copolymers of polystyrene kg. 10% -
3917 29 30 --- Tubes of cellulose nitrate and celluloid, whether or not plasticised kg. 10% -
3917 29 40 --- Tubes of cellulose acetate or acetate butyrate kg. 10% -
3917 29 50 --- Tubes of vinyl plastics kg. 10% -
3917 29 90 --- Other kg. 10% -
  - Other tubes, pipes and hoses :      
3917 31 00 -- Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 MPa kg. 10% -
  -- Other, not reinforced or otherwise combined with other materials, without fittings :      
3917 32 10 --- Of condensation or rearrangement polymerization products, whether or not chemically modified kg. 10% -
3917 32 20 --- Of addition polymerisation products kg. 10% -
3917 32 90 --- Other kg. 10% -
3917 33 00 -- Other, not reinforced or otherwise combined with other materials, with fittings kg. 10% -
3917 39 -- Other:      
3917 39 10 --- Of condensation or rearrangement polymerization products, whether or not chemically modified kg. 10% -
3917 39 20 --- Of addition polymerisation products kg. 10% -
3917 39 90 --- Other kg. 10% -
3917 40 00 - Fittings kg. 10% -
3918 FLOOR COVERINGS OF PLASTICS, WHETHER OR NOT SELF-ADHESIVE, IN ROLLS OR IN THE FORM OF TILES; WALL OR CEILING COVERINGS OF PLASTICS, AS DEFINED IN NOTE 9 TO THIS CHAPTER      
3918 10 - Of polymers of vinyl chloride :      
3918 10 10 --- Wall or ceiling coverings combined with knitted or woven fabrics, nonwovens or felts kg. 15% -
3918 10 90 --- Other kg. 15% -
3918 90 - Of other plastics :      
3918 90 10 --- Floor coverings of linoxyne kg. 15% -
3918 90 20 --- Wall or ceiling coverings combined with knitted or woven fabrics, nonwovens or felts kg. 15% -
3918 90 90 --- Other kg. 15% -
3919 SELF-ADHESIVE PLATES, SHEETS, FILM, FOIL, TAPE, STRIP AND OTHER FLAT SHAPES, OF PLASTICS, WHETHER OR NOT IN ROLLS      
3919 10 00 - In rolls of width not exceeding 20 cm kg. 10% -
3919 90 - Other :      
3919 90 10 --- Plastic stickers, whether or not printed, embossed, or impregnated kg. 10% -
3919 90 20 --- Cellulose adhesive tape kg. 10% -
3919 90 90 --- Other kg. 15% -
3920 OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS, NON-CELLULAR AND NOT REINFORCED, LAMINATED, SUPPORTED OR SIMILARLY COMBINED WITH OTHER MATERIALS      
3920 10 - Of polymers of ehtylene :      
  --- Sheets of polyethylene :      
3920 10 11 ---- Rigid, plain kg. 10% -
3920 10 12 ---- Flexible, plain kg. 10% -
3920 10 13 ---- Geomembrane, conforming to IS 16352 kg. 10% -;
3920 10 19 ---- Other kg. 10% -
  --- Other :      
3920 10 91 ---- Rigid, plain kg. 10% -
3920 10 92 ---- Flexible, plain kg. 10% -
3920 10 99 ---- Other kg. 10% -
3920 20 - Of polymers of propylene :      
3920 20 10 --- Rigid, plain kg. 10% -
3920 20 20 --- Flexible, plain kg. 10% -
3920 20 90 --- Other kg. 10% -
3920 30 - Of polymers of styrene :      
3920 30 10 --- Rigid, plain kg. 10% -
3920 30 20 --- Flexible, plain kg. 10% -
3920 30 90 --- Other kg. 10% -
- Of polymers of vinyl chloride:      
3920 43 00 -- Containing by weight not less than 6% of plasticizers kg. 10% -
3920 49 00 -- Other kg. 10% -
  - Of acrylic polymers:      
3920 51 -- Of poly (methyl methacrylate):      
--- Sheets :      
3920 51 11 ---- Rigid, plain kg. 10% -
3920 51 12 ---- Flexible, plain kg. 10% -
3920 51 19 ---- Other kg. 10% -
--- Other :      
3920 51 91 ---- Rigid, plain kg. 10% -
3920 51 92 ---- Flexible, plain kg. 10% -
3920 51 99 ---- Other kg. 10% -
3920 59 -- Other :      
--- Polyacrylate sheets:      
3920 59 11 ---- Rigid, plain kg. 10% -
3920 59 12 ---- Flexible, plain kg. 10% -
3920 59 19 ---- Other kg. 10% -
--- Other :      
3920 59 91 ---- Rigid, plain kg. 10% -
3920 59 92 ---- Flexible, plain kg. 10% -
3920 59 99 ---- Other kg. 10% -
  - Of polycarbonates, alkyd resins, polyallyl esters or other polyesters :      
3920 61 -- Of polycarbonates :      
3920 61 10 --- Rigid, plain kg. 10% -
3920 61 20 --- Flexible, plain kg. 10% -
3920 61 90 --- Other kg. 10% -
3920 62 -- Of poly (ethylene terephthalate):      
3920 62 10 --- Rigid, plain kg. 10% -
3920 62 20 --- Flexible, plain kg. 10% -
3920 62 90 --- Other kg. 10% -
3920 63 -- Of unsaturated polyesters :      
3920 63 10 --- Rigid, plain kg. 10% -
3920 63 20 --- Flexible, plain kg. 10% -
3920 63 90 --- Other kg. 10% -
3920 69 -- Of other polyesters :      
  --- Packaging film :      
3920 69 11 ---- Rigid, plain kg. 10% -
3920 69 12 ---- Flexible, plain kg. 10% -
3920 69 19 ---- Other kg. 10% -
  --- Sun and/or dust control film :      
3920 69 21 ---- Rigid, plain kg. 10%  
3920 69 22 ---- Flexible, plain kg. 10% -
3920 69 29 ---- Other kg. 10% -
  --- Other film :      
3920 69 31 ---- Rigid, plain kg. 10% -
3920 69 32 ---- Flexible, plain kg. 10% -
3920 69 39 ---- Other kg. 10% -
  --- Other :      
3920 69 91 ---- Rigid, plain kg. 10% -
3920 69 92 ---- Flexible, plain kg. 10% -
3920 69 99 ---- Other kg. 10% -
  - Of cellulose or its chemical derivatives :      
3920 71 -- Of regenerated cellulose:      
  --- Cello phane transparent:      
3920 71 11 ---- Film kg. 10% -
3920 71 19 ---- Other kg. 10% -
  --- Sheets of cellulose nitrate and celluloid, whether or not plasticized :      
3920 71 21 ---- Plain kg. 10% -
3920 71 29 ---- Other kg. 10% -
  --- Other :      
3920 71 91 ---- Rigid, plain kg. 10% -
3920 71 92 ---- Flexible, plain kg. 10% -
3920 71 99 ---- Other kg. 10% -
3920 73 -- Of cellulose acetate :      
  --- Sheet of cellulose acetate, non-plasticized:      
3920 73 11 ---- Rigid, plain kg. 10% -
3920 73 12 ---- Flexible, plain kg. 10% -
3920 73 19 ---- Other kg. 10% -
  --- Sheets of cellulose acetate, plasticized :      
3920 73 21 ---- Rigid, plain kg. 10% -
3920 73 22 ---- Flexible, plain kg. 10% -
3920 73 29 ---- Other kg. 10% -
  --- Other :      
3920 73 91 ---- Rigid, plain kg. 10% -
3920 73 92 ---- Flexible, plain kg. 10% -
3920 73 99 ---- Other kg. 10% -
3920 79 -- Of other cellulose derivatives :      
  --- Sheets of cellulose nitrate and celluloid, whether or not plasticized :      
3920 79 11 ---- Rigid, plain kg. 10% -
3920 79 12 ---- Flexible, plain kg. 10% -
3920 79 19 ---- Other kg. 10% -
  --- Other :      
3920 79 91 ---- Rigid, plain kg. 10% -
3920 79 92 ---- Flexible, plain kg. 10% -
3920 79 99 ---- Other kg. 10% -
  - Of other plastics:      
3920 91 - - Of poly (vinyl butyral):      
3920 91 10 - - - Rigid, plain kg. 10% -
3920 91 20 - - - Flexible, plain kg. 10% -
3920 91 90 - - - Other kg. 10% -
3920 92 -- Of polyamides :      
  --- Poly (amide fluoride) film:      
3920 92 11 ---- Rigid, plain kg. 10% -
3920 92 12 ---- Flexible, plain kg. 10% -
3920 92 19 ---- Other kg. 10% -
  --- Other :      
3920 92 91 ---- Rigid, plain kg. 10% -
3920 92 92 ---- Flexible, plain kg. 10% -
3920 92 99 ---- Other kg. 10% -
3920 93 -- Of amino-resins :      
3920 93 10 --- Rigid, plain kg. 10% -
3920 93 20 --- Flexible, plain kg. 10% -
3920 93 90 --- Other kg. 10% -
3920 94 -- Of phenolic resins :      
3920 94 10 --- Rigid, plain kg. 10% -
3920 94 20 --- Flexible, plain kg. 10% -
3920 94 90 --- Other kg. 10% -
3920 99 --- Of other plastics :      
  --- Plates, sheets, film, foil and strip of poly(vinyl acetate) :      
3920 99 11 ---- Rigid, plain kg. 10% -
3920 99 12 ---- Flexible, plain kg. 10% -
3920 99 19 ---- Other kg. 10% -
  --- Film, sheets, strip of vinyl plastics :      
3920 99 21 ---- Rigid, plain kg. 10% -
3920 99 22 ---- Flexible, plain kg. 10% -
3920 99 29 ---- Other kg. 10% -
  --- Plates, sheets, strip, film or foil of copolymers of vinyl chloride and vinyl acetate :      
3920 99 31 ---- Rigid, plain kg. 10% -
3920 99 32 ---- Flexible, plain kg. 10% -
3920 99 39 ---- Other kg. 10% -
  --- Sheet of poly (tetrafluoro-ethylene) (PTFE):      
3920 99 41 ---- Rigid, plain kg. 10% -
3920 99 42 ---- Flexible, plain kg. 10% -
3920 99 49 ---- Other kg. 10% -
  --- Retro reflective sheeting :      
3920 99 51 ---- Rigid, plain kg. 10% -
3920 99 52 ---- Flexible, plain kg. 10% -
3920 99 59 ---- Other kg. 10% -
3920 99 60 ---- Clicking boards for leather machinery kg. 10% -
--- Other :      
3920 99 91 ---- Rigid, plain kg. 10% -
3920 99 92 ---- Flexible, plain kg. 10% -
3920 99 99 ---- Other kg. 15% -
3921 OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS      
  - Cellular :      
3921 11 00 -- Of polymers of styrene kg. 10% -
3921 12 00 -- Of polymers of vinyl chloride kg. 10% -
3921 13 -- Of polyurethanes:      
3921 13 10 --- Flexible kg. 10% -
3921 13 90 --- Other kg. 10% -
3921 14 00 -- Of regenerated cellulose kg. 10% -
3921 19 00 -- Of other plastics kg. 10% -
3921 90 - Other :      
3921 90 10 --- Thermocol kg. 10% -
--- Of polymers of vinyl chloride :      
3921 90 21 ---- Rigid, lacquered kg. 10% -
3921 90 22 ---- Flexible, lacquered kg. 10% -
3921 90 23 ---- Rigid, metallised kg. 10% -
3921 90 24 ---- Flexible, metallised kg. 10% -
3921 90 25 ---- Rigid, laminated kg. 10% -
3921 90 26 ---- Flexible, laminated kg. 10% -
3921 90 29 ---- Other kg. 10% -
--- Of regenerated cellulose :      
3921 90 31 ---- Rigid, lacquered kg. 10% -
3921 90 32 ---- Flexible, lacquered kg. 10% -
3921 90 33 ---- Rigid, metallised kg. 10% -
3921 90 34 ---- Flexible, metallised kg. 10% -
3921 90 35 ---- Rigid, laminated kg. 10% -
3921 90 36 ---- Flexible, laminated kg. 10% -
3921 90 39 ---- Other kg. 10% -
--- Other :      
3921 90 91 ---- Rigid, lacquered kg. 10% -
3921 90 92 ---- Flexible, lacquered kg. 10% -
3921 90 93 ---- Rigid, metallised kg. 10% -
3921 90 94 ---- Flexible, metallised kg. 10% -
3921 90 95 ---- Rigid, laminated kg. 10% -
3921 90 96 ---- Flexible, laminated kg. 10% -
3921 90 99 ---- Other kg. 10% -
3922 BATHS, SHOWER-BATHS, SINKS, WASH-BASINS, BIDETS, LAVATORY PANS, SEATS AND COVERS, FLUSHING CISTERNS AND SIMILAR SANITARY WARE, OF PLASTICS      
3922 10 00 - Baths, shower-baths, sinks and wash basins kg. 15% -
3922 20 00 - Lavatory seats and covers kg. 15% -
3922 90 00 - Other kg. 15% -
3923 ARTICLES FOR THE CONVEYANCE OR PACKING OF GOODS, OF PLASTICS; STOPPERS, LIDS, CAPS AND OTHER CLOSURES, OF PLASTICS      
3923 10 - Boxes, cases, crates and similar articles:      
3923 10 10 --- Plastic containers for audio or video cassettes, cassette tapes, floppy disk and similar articles kg. 15% -
3923 10 20 --- Watch-box, jewellery box and similar containers of plastics kg. 15% -
3923 10 30 --- Insulated ware kg. 15% -
3923 10 40 --- Packing for accommodating connectors kg. 15% -
3923 10 90 --- Other kg. 15% -
  - Sacks and bags (including cones):      
3923 21 00 -- Of polymers of ethylene kg. 15%  
3923 29 -- Of other plastics:      
3923 29 10 --- Of poly (vinyl chloride) kg. 15% -
3923 29 90 --- Other kg. 15% -
3923 30 - Carboys, bottles, flasks and similar articles:      
3923 30 10 --- Insulated ware kg. 15% -
3923 30 90 --- Other kg. 15% -
3923 40 00 - Spools, cops, bobbins and similar supports kg. 15% -
3923 50 - Stoppers, lids, caps and other closures :      
3923 50 10 --- Caps and closures for bottles kg. 15% -
3923 50 90 --- Other kg. 15% -
3923 90 - Other :      
3923 90 10 --- Insulated ware kg. 15% -
3923 90 20 --- Aseptic bags kg. 15% -
3923 90 90 --- Other kg. 15% -
3924 TABLEWARE, KITCHENWARE, OTHER HOUSEHOLD ARTICLES AND HYGIENIC OR TOILET ARTICLES, OF PLASTICS      
3924 10 - Tableware and kitchenware :      
3924 10 10 --- Insulated ware kg. 15% -
3924 10 90 --- Other kg. 15% -
3924 90 - Other :      
3924 90 10 --- Toilet articles kg. 15% -
3924 90 20 --- Insulated ware kg. 15% -
3924 90 90 --- Other kg. 15% -
3925 BUILDERS' WARE OF PLASTICS, NOT ELSEWHERE SPECIFIED OR INCLUDED      
3925 10 00 - Reservoirs, tanks, vats and similar containers, of a capacity exceeding 3001 kg. 15% -
3925 20 00 - Doors, windows and their frames and thresholds for doors kg. 15% -
3925 30 00 - Shutters, blinds (including Venetian blinds) and similar articles and parts thereof kg. 15% -
3925 90 - Other :      
3925 90 10 --- Of polyurethane kg. 15% -
3925 90 90 --- Other kg. 15% -
3926 OTHER ARTICLES OF PLASTICS AND ARTICLES OF OTHER MATERIALS OF HEADINGS 3901 TO 3914      
3926 10 - Office or school supplies :      
--- Office supplies of a kind classified as stationery other than pins, clips, and writing instruments :      
3926 10 11 ---- Of polyurethane foam kg. 15% -
3926 10 19 ---- Other kg. 15% -
--- Other :      
3926 10 91 ---- Of polyurethane foam kg. 15% -
3926 10 99 ---- Other kg. 15% -
3926 20 - Articles of apparel and clothing accessories (including gloves, mittens and mitts) :      
--- Gloves :      
3926 20 11 ---- Disposable kg. 15% -
3926 20 19 ---- Non-disposable kg. 15% -
--- Aprons :      
3926 20 21 ---- Of polyurethane foam kg. 15% -
3926 20 29 ---- Other kg. 15% -
--- Plastic stickers for garments :      
3926 20 31 ---- Of polyurethane foam kg. 15% -
3926 20 39 ---- Other kg. 15% -
  --- Collar stays, patties, butterfly, shoulder-pads and other stays :      
3926 20 41 ---- Of polyurethane foam kg. 15% -
3926 20 49 ---- Other kg. 15% -
  --- Other :      
3926 20 91 ---- Of polyurethane foam kg. 15% -
3926 20 99 ---- Other kg. 15% -
3926 30 - Fittings for furniture, coach work or the like :      
3926 30 10 --- Of polyurethane foam kg. 15% -
3926 30 90 --- Other kg. 15% -
3926 40 - Statuettes and other ornamental articles :      
--- Bangles :      
3926 40 11 ---- Of polyurethane foam kg. 15% -
3926 40 19 ---- Other kg. 15% -
--- Beads :      
3926 40 21 ---- Of polyurethane foam kg. 15% -
3926 40 29 ---- Other kg. 15% -
  --- Statuettes :      
3926 40 31 ---- Of polyurethane foam kg. 15% -
3926 40 39 ---- Other kg. 15% -
  --- Table and other household articles (including hotel and restaurant) for decoration :      
3926 40 41 ---- Of polyurethane foam kg. 15% -
3926 40 49 ---- Other kg. 15% -
  --- Decorative sheets :      
3926 40 51 ---- Of polyurethane foam kg. 15% -
3926 40 59 ---- Other kg. 15% -
3926 40 60 --- Sequine kg. 15% -
  --- Other :      
3926 40 91 ---- Of polyurethane foam kg. 15% -
3926 40 99 ---- Other kg. 15% -
3926 90 - Other :      
3926 90 10 --- PVC belt conveyor kg. 15% -
--- Couplers, packing rings, O rings and the like:      
3926 90 21 ---- Of polyurethane foam kg. 15% -
3926 90 29 ---- Other kg. 15% -
  --- Lasts, with or without steel hinges ; EVA and grape sheets for soles and heels; welts:      
3926 90 31 ---- Of polyurethane foam kg. 15% -
3926 90 39 ---- Other kg. 15% -
  --- Rings, buckles, tacks, washers and other decorative fittings made of plastic used as trimmings and embellishments for leather products; patterns for leather foot wear, leather garments and leather goods :      
3926 90 41 ---- Of polyurethane foam kg. 15% -
3926 90 49 ---- Other kg. 15% -
  --- Retroreflective sheeting of other than of heading 3920 :      
3926 90 51 ---- Of polyurethane foam kg. 15% -
3926 90 59 ---- Other kg. 15% -
  --- Hangers :      
3926 90 61 ---- Of polyurethane foam kg. 15% -
3926 90 69 ---- Other kg. 15% -
  --- Plastic or nylon tipped hammers; in sulating liner of nylon , HDPE :      
3926 90 71 ---- Of polyurethane foam kg. 15% -
3926 90 79 ---- Other kg. 15% -
3926 90 80 --- Polypropylene articles, not elsewhere specified or included kg. 15% -
--- Other:      
3926 90 91 ---- Of polyurethane foam kg. 15% -
3926 90 99 ---- Other kg. 15% -